HT3O 3way Tower kit, DIY Speaker Kits Canada & Customer Speaker Cabinets

The HT3O is our 3 way tower design, using only a small 7" (width) X 11" (depth) foot print these speakers require only a small area yet produce a very large sound stage.
With our new OW4 Hiquphon Platinum dome tweeter retaining the same crossover points as our popular HT3 with our ribbon tweeter.
Crossover info: The tweeter uses a 3rd order crossover blended to a Mid range 1st order crossed over at 2500Hz with a 2nd order network on the woofer.
Compact plus dynamic ,yet not over shadowed for it size the HT3O finished in our
Slim looking ,style with shocking mids,highs lows tuned to 29hz...

:: 2- OW4 Hiquphon tweeter

:: Mundorf (Solen) capacitor stack on the large midrange capacitors
:: Air core Inductors
:: Metal Oxide resistors
:: Sonicap Gen II By-pass caps

:: Terminal cups
:: assembled 2" flarded ports ports
:: wire, screws, Poly damping material
:: Standard speaker spikes
:: 2- CNC pre machined baffles included

:: Cardas Lead Free Silver Solder
:: cabinet construction plans,CD containing complete contruction photos of the cabinets along with the crossover layout plans

:: Build your own cabinets.

:: Recommended cabinet dimensions:

Ported

cabinet tuned to 29hz 40" X 7" X 11"
:: Sensitivity 85 db (1watt/1m
:: Impedance: 8 ohms nominal

BAFFLES are included GRILLS AND ARE NOT INCLUDED

Pre CNC machined baffles included

**Additional Product Information**

**Optional Add-Ons**

RAW Ice Acoustical 1" Foam (+$99.00 USD)
*Add to your shopping cart on check out*
RAW ICE Acoustical foam 1" thick
A simple acoustic material that does not effect the inside volume of a speaker.
Designed to absorb standing waves and internal reflections inside the speaker enclosure.
This product can be cut with a razor knife for easy installation into your speaker cabinet,the black facing we place to the cabinet wall with the solid foam open to the inside of the speaker cabinet.

Bi-wire Option (+$195.00 USD)
*Add to your shopping cart on check out*
Bi-wire Option, complete with RAW Acoustics binding posts (high quality solid hard copper with 24k gold-plated construction; accepts banana plugs, spades, 12 gauge wire, and terminal pins.) plus RAW Acoustics handcrafted jumper wires.
1) Click to see an image of the bi-wire
2) Click to see the bi-wire installed

Crossover Assembly (+$125.00 USD)
*Add to your shopping cart on check out*
For those who do not feel they can assemble the crossovers we will assemble and wire the crossovers for you.
This only leaves mounting the crossover board inside the cabinet plus the connections to the drivers and terminals very simple.
(Labour only)

QED Silver Anniversary wire (+$85.00 USD)
*Add to your shopping cart on check out*
QED Silver anniversary wire to complete the internal wiring for your speaker kit.

tweeter & midrange Sonicap upgrade (+$295.00 USD)
*Add to your shopping cart on check out*
Upgrade your HT3/HT3O/HT8/HT8O tweeter midrange capacitors from Solen or Erse capacitors to the Sonicap capacitors plus Mills resistors.The Sonicap will yield or exceed the performance found in the most prestigious of boutique caps, yet with a price conducive to that of "entry level".While capacitors suffer from more noise (high distortion) than most audio components, the Sonicap exhibits very low noise and parasitics. The presentation is rich in harmonics, warm, without the slightest loss of detail retrieval! As a matter of fact, the micro-dynamics of the Sonicap is unmatched by anything close to its price range.Many of the Sonicap capacitors are needed in some speakers due to large capacitor values used in some models.

WaveZorber I (+$195.00 USD)
*Add to your shopping cart on check out*
WaveZorber I (sold in set of 4) is an audiophile quality, adjustable 1/2" O-ringed solid brass spike, threaded into a precision Machined Acetal (Delrin®) Base. The base is custom machined from Delrin® for extreme durability and strength as well as to completely eliminate any vibrations, which can occur between base and the spike. A rubber O-ring is fitted to the brass rod to ensure that spike stays adjusted correctly as well as to dampen vibrations.

The WaveZorber spike is adjustable up to 1/2" (1.3 cm) from 2 1/2”-3” tall. The brass spike, Delrin® base and the O-ring work in together to ensure complete elimination of vibration at any point of adjustment.

Add the WaveZorber III for Hard flooring foot with a ball/socket design.

WaveZorber I and II comes as a set of four and includes the following:
1.   O-Ringed brass spike with Delrin® base   4
2.   Die cut double sided 1/8" foam tape   4
3.   Self-tapping screws (1 extra)   13
4.   Stainless steel turning rod   1